Description

The Full Bag Fitting is the most complete game improvement experience STUDIO offers — three hours, one-on-one with a Certified Fitter, and Trackman data on every club from driver to putter. We dial in lofts, lies, shafts, and yardage gaps so every distance is covered and every club performs the way it should. The result: more fairways hit, tighter dispersion, cleaner gapping, and a bag built around your swing.

What to Expect

1. Your Certified Fitter starts by getting to know you, your goals, and what you're hoping to get out of your fitting. You'll walk through your typical miss, the parts of your bag that frustrate you the most, and any budget considerations to keep in mind
2. You'll warm up and hit your existing clubs to establish a baseline for the numbers we're looking to beat. If you don't have a current set, no problem. We'll start with a quick build from our demo matrix so we have data to work from. From there, we'll pick a section of the bag — driver, irons, wedges — and tackle one piece at a time.
3. Once we know which numbers we're trying to improve — ball speed, spin, launch, dispersion, distance — we start with shafts. Isolating one variable at a time lets your Certified Fitter dial in the foundation of your improvement and build on it as you go.
4. With the right shaft identified, your Certified Fitter moves on to clubheads, repeating the test with the optimal shaft for consistency. We narrow it down based on what the data — and your eyes — tell us.
5. Once shaft and head are dialed in, your Certified Fitter will finalize the details: length, lie, loft, swing weight, and grip. Then we move on to the next part of the bag and start the process again, until everything from driver to wedge is optimized.
6. Once your full swing clubs are complete, your Certified Fitter, using SAM PuttLab, will dial in your putter's length, loft, head style, and more, so the ball starts on your intended line more often.
7. At the end of your fitting, you'll walk out with a complete build sheet — every spec for every club in your bag, along with a clear, itemized recommendation.

Description

In your STUDIO Driver Fitting, our Certified Fitters use Trackman data to dial in club head, shaft, loft, and lie — optimizing ball speed, launch, and spin for your exact swing. The result: more distance off the tee, tighter dispersion, and a driver that you feel confident hitting on every hole.

What to Expect

1. Your Certified Fitter starts by getting to know you, your swing, and what you're hoping to get out of your fitting. We'll talk through your typical miss off the tee, the shape of your shot, and any budget considerations to keep in mind.
2. You'll warm up and hit your existing driver to establish a baseline for the numbers we're looking to beat. If you don't have a current driver, no problem. We'll start with a quick build from our demo matrix, so we have data to work from.
3. Once we know which numbers we're trying to improve — ball speed, spin, launch, dispersion, distance — we start with shafts. Isolating one variable at a time lets your Certified Fitter identify the foundation of your improvement and build on it from there.
4. With the right shaft identified, your Certified Fitter moves on to clubheads, repeating the test using the optimal shaft for consistency. We narrow it down based on what the data — and your eyes — tell us.
5. Once the shaft and club head are dialed in, your Certified Fitter will finalize the details like length, lie, loft, swing weight, and grip.
6. At the end of your fitting, you'll walk out with a complete build sheet — every spec for your custom-fit driver, along with a clear, itemized recommendation.

Description

The clubs that fill the gap between driver and irons should be your most versatile — but most golfers are guessing. STUDIO's Wood/Hybrid Fitting closes the gap. Your Certified Fitter uses Trackman data to identify the right loft, shaft, and club head combination for the long approaches, par 5s, and tee shots that don't call for driver. The result is tighter yardage gaps, higher launch where you need it, and a confident club for every situation.

What to Expect

1. Your Certified Fitter starts by getting to know you, your swing, and what you're hoping to get out of your fitting. We'll talk through your typical miss, the shots you're trying to hit better — long approaches, par 5s, tight tee shots — and any budget considerations to keep in mind.
2. You'll warm up and hit your existing fairway woods or hybrids to establish a baseline for the numbers we're looking to beat. If you don't have a current set, no problem. We'll build a starting point from our demo matrix, so we have data to work from.
3. Once we know which numbers we're trying to improve — ball speed, launch, spin, dispersion, distance — we start with shafts. Isolating one variable at a time lets your Certified Fitter identify the foundation of your improvement and build on it from there.
4. With the right shaft identified, your Certified Fitter moves on to clubheads, repeating the test using the optimal shaft for consistency. We narrow it down based on what the data — and your eyes — tell us.
5. Once the shaft and club head are dialed in, your Certified Fitter will finalize the details like length, lie, loft, swing weight, set composition, and grip.
6. At the end of your fitting, you'll walk out with a complete build sheet — every spec for your custom-fit fairway wood/hybrid, along with a clear, itemized recommendation.

Description

Your irons are the scoring engine of your bag — and proper fit is the difference between hitting greens and missing them. STUDIO's Iron Fitting uses Trackman data to test club head, shaft weight, length, lie angle, and set composition against your actual swing. The result is more consistent contact, better distance control, and tighter dispersion on every approach. Cleaner strikes. Truer numbers. More greens in regulation.

What to Expect

1. Your Certified Fitter starts by getting to know you, your swing, and what you're hoping to get out of your fitting. We'll talk through your typical miss, the irons you've been playing - what you like and dislike, and any budget considerations to keep in mind.
2. You'll warm up and hit your current 7-iron to establish a baseline for the numbers we're looking to beat. If you don't have a current set, no problem. We'll build a starting point from our demo matrix, so we have data to work from.
3. Once we know which numbers we're trying to improve — ball speed, launch, spin, dispersion, distance — we start with shafts. Isolating one variable at a time lets your Certified Fitter identify the foundation of your improvement and build on it from there.
4. With the right shaft identified, your Certified Fitter moves on to clubheads, repeating the test using the optimal shaft for consistency. We narrow it down based on what the data — and your eyes — tell us.
5. Once the shaft and club head are dialed in, your Certified Fitter will finalize the details like length, lie, loft, swing weight, set composition, and grip.
6. At the end of your fitting, you'll walk out with a complete build sheet — every spec for your custom-fit iron set, along with a clear, itemized recommendation.

Description

Inside 100 yards is where strokes are won and lost — and most golfers are playing wedges with the wrong loft, bounce, or grind for their swing and the turf they play. STUDIO's Wedge Fitting fixes that. Using Trackman data, your Certified Fitter will dial in the right combination of lofts, bounces, and grinds to give you cleaner contact, more spin control, and the kind of distance precision that lowers scores.

What to Expect

1. Your Certified Fitter starts by getting to know you, your short game, and what you're hoping to get out of your fitting. We'll talk through your typical wedge yardages, the turf conditions you usually play on, the shots you struggle with, and any budget considerations to keep in mind.
2. You'll warm up and hit your current wedges to establish a baseline for the numbers we're looking to beat. If you don't have a current wedge set, no problem. We'll start with an option from our demo matrix, so we have data to work from.
3. Once we know which numbers we're trying to improve — spin, launch, distance control, dispersion — we isolate one variable at a time. Your Certified Fitter will work through loft combinations to close gapping issues, then dial in the right bounce and grind for your swing and the turf you play.
4. With loft, bounce, and grind dialed in, your Certified Fitter will match the right shaft profile and head design to your swing — repeating the test for consistency until the data confirms the right combination.
5. Once everything is dialed in, your Certified Fitter will finalize the details like grip choice. Every spec is matched to your swing and the way you play your wedge shots.
6. At the end of your fitting, you'll walk out with a complete build sheet — every spec for your custom-fit wedge setup, along with a clear, itemized recommendation.

Description

The putter is the most-used club in your bag — and the most overlooked when it comes to fit. Length, lie, loft, blade vs mallet, and stroke type all impact whether putts start on line and roll true. STUDIO's Putter Fitting uses SAM PuttLab to match the putter to your stroke and your eye, so the ball starts on your intended line more often. The result? More putts holed each round.

Whats to Expect

1. Your Certified Fitter starts by getting to know you, your game, and what you're hoping to get out of your fitting. We'll talk through the putters you've used in the past, what you liked about them, and any budget considerations to keep in mind.
2. Your Certified Fitter will input the specs of your existing putter into SAM PuttLab and capture a baseline of your stroke — face angle at impact, path, tempo, rotation, and consistency. These are the numbers and tendencies we're looking to improve. If you don't have a current putter, no problem. We'll start with an option from our demo matrix, so we have data to work from.
3. SAM PuttLab's diagnostics determine the toe hang, head shape, length, loft, lie, weight, and offset that best match your stroke. Instead of guessing what should feel right, we use the data to identify what actually performs.
4. Once we know what your stroke needs, you'll test putters built around those specs — measuring efficacy in real time with SAM PuttLab and dialing in look and feel.
5. Once you and your Certified Fitter have identified the right putter, we'll finalize the details like grip choice.
6. At the end of your fitting, you'll walk out with a complete build sheet — every spec for your custom-fit putter, along with a clear, itemized recommendation.